PartsTable
Technical Data Sheet
Download PDF

1722A41 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1722A41: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.313 INCHES NOMINAL IN, length: 0.438 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.112 INCHES NOMINAL IN, overall_height: 0.688 INCHES NOMINAL IN, mounting_method: SCREW. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-560-2640, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1722A41
NSN: 5340-01-560-2640
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
width0.313 INCHES NOMINAL IN
length0.438 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.112 INCHES NOMINAL IN
hole_quantity1
overall_height0.688 INCHES NOMINAL IN
mounting_methodSCREW
style_designatorSTANDOFF
surface_treatmentNICKEL OVERALL
loop/holding_dimension0.188 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
end_item_identificationNHA P/N 11B351011;4910-01-539-8440, SHOP EQUIPT, HYDRAULIC SYS, TRA
NSN5340-01-560-2640
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1722A41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.438 INCHES NOMINAL IN
•
MOUNTING METHOD: SCREW
•
STYLE DESIGNATOR: STANDOFF
•
LOOP/HOLDING DIMENSION: 0.188 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
WIDTH: 0.313 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.688 INCHES NOMINAL IN
LENGTH0.438 INCHES NOMINAL IN
MOUNTING METHODSCREW
STYLE DESIGNATORSTANDOFF
LOOP/HOLDING DIMENSION0.188 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
WIDTH0.313 INCHES NOMINAL IN
END ITEM IDENTIFICATIONNHA P/N 11B351011;4910-01-539-8440, SHOP EQUIPT, HYDRAULIC SYS, TRA
MATERIALSTEEL OVERALL
HOLE QUANTITY1
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
11B352957Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1722A41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1722A41?
1722A41 is a CLIP,SPRING TENSION.
What parts can replace 1722A41?
There is 1 known substitute for 1722A41: 11B352957. Substitute compatibility should be verified for your specific system.
What is the NSN for 1722A41?
1722A41 is cataloged in the U.S. Government catalog under NSN 5340-01-560-2640. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1722A41

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.