PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17207-1
17207-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include end_item_identification: ANEMOMETER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-227-0668, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17207-1
NSN: 5340-01-227-0668
FSC: 5340
CAGE: 07070 — UNITED STATES DEPARTMENT OF THE NAVY DBA NAVAL SURFACE WARFARE CENTER PANAMA CITY (USA)
SPECIFICATIONS
end_item_identificationANEMOMETER
NSN5340-01-227-0668
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17207-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.400 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 6061 BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.200 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 2.010 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.245 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.400 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061 BAND
SPECIAL FEATURESINCLUDES ONE NUT,PLAIN; ONE WASHER,LOCK; ONE SCREW,CAP,HEX; MATERIAL TEMPER T6
DISTANCE FROM LOOP CENTER TO TONGUE END2.200 INCHES NOMINAL IN
LOOP INSIDE DIAMETER2.010 INCHES NOMINAL IN
MATERIAL THICKNESS0.245 INCHES NOMINAL IN
OVERALL WIDTH1.600 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.640 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
17207Interchangeable
interchangeable cross-reference
interchangeable
17207-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17207-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17207-1?
17207-1 is a CLAMP,LOOP.
What parts can replace 17207-1?
There are 2 known substitutes for 17207-1: 17207, 17207-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 17207-1?
17207-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-227-0668. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17207-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026