PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 172-82
172-82 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CYLINDER ASSEMBLY,HYDRAULIC BRAK. Key specifications include material: IRON CAST BODY, bore_type: STRAIGHT, port_style: GASKET SEAL SINGLE PORT, bore_diameter: 1.125 INCHES NOMINAL IN, overall_width: 2.625 INCHES NOMINAL IN, overall_height: 1.812 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-019-0580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
172-82
NSN: 5330-00-019-0580
FSC: 5330
CAGE: 44185 — TLD WOLLARD LLC (USA)
SPECIFICATIONS
materialIRON CAST BODY
bore_typeSTRAIGHT
port_styleGASKET SEAL SINGLE PORT
bore_diameter1.125 INCHES NOMINAL IN
overall_width2.625 INCHES NOMINAL IN
overall_height1.812 INCHES NOMINAL IN
features_providedRUBBER BOOT
mounting_positionRIGHT
port_thread_class2B SINGLE PORT
mounting_provisionTHREADED MOUNTING HOLES
port_thread_diameter0.438 INCHES NOMINAL SINGLE PORT IN
body_outside_diameter1.625 INCHES NOMINAL IN
NSN5330-00-019-0580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 172-82 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
1728-02-00Interchangeable
interchangeable cross-reference
interchangeable
8836486Interchangeable
interchangeable cross-reference
interchangeable
236-1040P2Interchangeable
interchangeable cross-reference
interchangeable
NU14494Interchangeable
interchangeable cross-reference
interchangeable
WC14494Interchangeable
interchangeable cross-reference
interchangeable
3537Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 172-82?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 172-82?
172-82 is a CYLINDER ASSEMBLY,HYDRAULIC BRAK manufactured by Clementoni.
What parts can replace 172-82?
There are 9 known substitutes for 172-82: 1728-02-00, 8836486, 236-1040P2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 172-82?
172-82 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-019-0580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 172-82

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026