PartsTable
Technical Data Sheet
PartsTable / MRO / 172-61
172-61 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CYLINDER ASSEMBLY,HYDRAULIC BRAK. Key specifications include material: STEEL OVERALL, bore_type: STRAIGHT, end_style: OFFSET HOOK, SIDE BOTH ENDS, port_style: INVERTED FLARE SINGLE PORT, design_type: CLOSED, hook_radius: 0.125 INCHES NOMINAL BOTH ENDS IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 2530-00-339-5405, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 172-61
NSN: 2530-00-339-5405
FSC: 2530
CAGE: 76462 — DELCO MORAINE DIV OF GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_typeSTRAIGHT
end_styleOFFSET HOOK, SIDE BOTH ENDS
port_styleINVERTED FLARE SINGLE PORT
design_typeCLOSED
hook_radius0.125 INCHES NOMINAL BOTH ENDS IN
load_rating7.00 POUNDS NOMINAL LBS
shaft_length53.0 INCHES NOMINAL SINGLE ACTUATOR IN
bore_diameter1.000 INCHES NOMINAL IN
coil_quantity24
opening_width0.188 INCHES NOMINAL BOTH ENDS IN
overall_width11.812 INCHES MAXIMUM IN
NSN2530-00-339-5405
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Clementoni CYLINDER ASSEMBLY,HYDRAULIC BRAK TITLE COMPONENT PN 172-61 MFR Clementoni CYLINDER ASSEMBLY,HYDR
KEY FEATURES
•
BORE TYPE: STRAIGHT
•
PORT THREAD CLASS: 2B SINGLE PORT
•
PORT THREAD SERIES DESIGNATOR: UNF SINGLE PORT
•
MOUNTING FACILITY THREAD DIRECTION: RIGHT-HAND
•
MOUNTING FACILITY THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SEAT ANGLE IN DEG: 45.0 SINGLE PORT
•
PORT LOCATION AND QUANTITY: 1 CENTER SECTION
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE TYPESTRAIGHT
PORT THREAD CLASS2B SINGLE PORT
PORT THREAD SERIES DESIGNATORUNF SINGLE PORT
MOUNTING FACILITY THREAD DIRECTIONRIGHT-HAND
MOUNTING FACILITY THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SEAT ANGLE IN DEG45.0 SINGLE PORT
PORT LOCATION AND QUANTITY1 CENTER SECTION
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS1.625 INCHES NOMINAL IN
BLEEDING FEATURE QUANTITY1
PORT THREAD DIAMETER0.375 INCHES NOMINAL SINGLE PORT IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
MMI8677Interchangeable
interchangeable cross-reference
interchangeable
2967Interchangeable
interchangeable cross-reference
interchangeable
32-2967Interchangeable
interchangeable cross-reference
interchangeable
17743Interchangeable
interchangeable cross-reference
interchangeable
537700P1Interchangeable
interchangeable cross-reference
interchangeable
537700Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 172-61?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 172-61?
172-61 is a CYLINDER ASSEMBLY,HYDRAULIC BRAK manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 172-61?
There are 22 known substitutes for 172-61: MMI8677, 2967, 32-2967 and 19 more. Substitute compatibility should be verified for your specific system.
Is 172-61 still available?
172-61 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 172-61

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026