PartsTable
Technical Data Sheet

17182J — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, peripheral_diameter: 1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM IN, center_hole_diameter: 1.332 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN, cross-sectional_height: 0.297 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-00-734-9393, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17182J
NSN: 5330-00-734-9393
FSC: 5330
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
peripheral_diameter1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM IN
center_hole_diameter1.332 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
cross-sectional_height0.297 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-00-734-9393
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17182J MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.297 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: U
•
PERIPHERAL DIAMETER: 1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.332 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIALSTEEL OVERALL
CROSS-SECTIONAL HEIGHT0.297 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEU
PERIPHERAL DIAMETER1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.332 INCHES MINIMUM AND 1.334 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
312270InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
47991InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
214314InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6-76-17InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
V2955XInterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
805P2InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17182J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17182J?
17182J is a RETAINER,PACKING.
What parts can replace 17182J?
There are 10 known substitutes for 17182J: 312270, 47991, 214314 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17182J?
17182J is cataloged in the Federal Logistics Information System under NSN 5330-00-734-9393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17182J