PartsTable
Technical Data Sheet
Download PDF

1717-M09-F09-1024 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1717-M09-F09-1024: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.7500 INCHES NOMINAL IN, material: STEEL COMP 303 STANDOFF, thread_class: 2B RIGHT INTERNAL, thread_length: 0.3750 INCHES NOMINAL LEFT EXTERNAL IN, style_designator: LEFT INTERNAL AND RIGHT EXTERNAL THREAD, thread_direction: RIGHT-HAND LEFT EXTERNAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-440-7758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1717-M09-F09-1024
NSN: 5340-01-440-7758
FSC: 5340 — Hardware, Commercial
CAGE: 04729 — UNICORP. (USA)
SPECIFICATIONS
length0.7500 INCHES NOMINAL IN
materialSTEEL COMP 303 STANDOFF
thread_class2B RIGHT INTERNAL
thread_length0.3750 INCHES NOMINAL LEFT EXTERNAL IN
style_designatorLEFT INTERNAL AND RIGHT EXTERNAL THREAD
thread_directionRIGHT-HAND LEFT EXTERNAL
surface_treatmentPASSIVATE STANDOFF
width_across_flats0.3750 INCHES NOMINAL IN
nominal_thread_size0.1900 INCHES LEFT EXTERNAL IN
cross-sectional_shapeHEXAGON
right_projection_length0.3750 INCHES NOMINAL IN
thread_quantity_per_inch24 LEFT EXTERNAL
NSN5340-01-440-7758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1717-M09-F09-1024 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.3750 INCHES NOMINAL IN
•
LENGTH: 0.7500 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE STANDOFF
•
THREAD LENGTH: 0.5000 INCHES NOMINAL RIGHT INTERNAL IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT EXTERNAL THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763, COND A FED SPEC SINGLE MATERIAL RESPONSE STANDOFF
•
THREAD DIRECTION: RIGHT-HAND RIGHT INTERNAL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.3750 INCHES NOMINAL IN
LENGTH0.7500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE STANDOFF
THREAD LENGTH0.5000 INCHES NOMINAL RIGHT INTERNAL IN
THREAD LENGTH0.3750 INCHES NOMINAL LEFT EXTERNAL IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT EXTERNAL THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763, COND A FED SPEC SINGLE MATERIAL RESPONSE STANDOFF
THREAD DIRECTIONRIGHT-HAND RIGHT INTERNAL
THREAD DIRECTIONRIGHT-HAND LEFT EXTERNAL
NOMINAL THREAD SIZE0.1900 INCHES RIGHT INTERNAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
14150-H-SS-750-12 (B=1024 X 3/8)Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4628-1024-SSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1717-M09-F09-1024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1717-M09-F09-1024?
1717-M09-F09-1024 is a STANDOFF,THREADED,SPACING.
What parts can replace 1717-M09-F09-1024?
There are 2 known substitutes for 1717-M09-F09-1024: 14150-H-SS-750-12 (B=1024 X 3/8), 4628-1024-SS. Substitute compatibility should be verified for your specific system.
What is the NSN for 1717-M09-F09-1024?
1717-M09-F09-1024 is cataloged in the U.S. Government catalog under NSN 5340-01-440-7758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1717-M09-F09-1024

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.