PartsTable
Technical Data Sheet
Download PDF

171679PC6 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

171679PC6: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OVERALL, nut_style: SLEEVE, nut_length: 0.380 INCHES NOMINAL IN, nut_diameter: 0.406 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN, thread_class: 2B, thread_length: 0.310 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-389-3083, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
171679PC6
NSN: 5310-00-389-3083
FSC: 5310 — Nuts and Washers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 OVERALL
nut_styleSLEEVE
nut_length0.380 INCHES NOMINAL IN
nut_diameter0.406 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
thread_class2B
thread_length0.310 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
thread_seriesUNF
flange_diameter0.625 INCHES NOMINAL IN
flange_thickness0.120 INCHES NOMINAL IN
special_featuresSAW CUT 0.062 IN. W BY 0.090 IN. DEEP LOCATED ON TOP OF NUT IN
thread_directionRIGHT-HAND
nominal_thread_size0.250 INCHES IN
NSN5310-00-389-3083
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 171679PC6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.625 INCHES NOMINAL IN
•
NUT LENGTH: 0.380 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.120 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD LENGTH: 0.310 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.625 INCHES NOMINAL IN
NUT LENGTH0.380 INCHES NOMINAL IN
FLANGE THICKNESS0.120 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD LENGTH0.310 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.406 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEROUND FLANGE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 171679PC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 171679PC6?
171679PC6 is a NUT,SLEEVE.
What is the NSN for 171679PC6?
171679PC6 is cataloged in the U.S. Government catalog under NSN 5310-00-389-3083. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 171679PC6