PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1715AC
1715AC ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.0781 INCHES NOMINAL IN, overall_height: 0.2968 INCHES NOMINAL IN, prong_quantity: 12, style_designator: STANDARD, surface_treatment: NICKEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-816-3424, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1715AC
NSN: 5340-00-816-3424
FSC: 5340
CAGE: 72653 — GC/WALDOM INC (USA)
SPECIFICATIONS
materialSTEEL
head_height0.0781 INCHES NOMINAL IN
overall_height0.2968 INCHES NOMINAL IN
prong_quantity12
style_designatorSTANDARD
surface_treatmentNICKEL
head_outside_diameter1.1562 INCHES NOMINAL IN
prong_outside_diameter1.0312 INCHES NOMINAL IN
hole_accommodation_diameter1.000 INCHES NOMINAL IN
material_accommodated_thickness0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
NSN5340-00-816-3424
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1715AC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRONG OUTSIDE DIAMETER: 1.0312 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 1.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL
•
MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
MATERIAL: STEEL
•
HEAD HEIGHT: 0.0781 INCHES NOMINAL IN
•
PRONG QUANTITY: 12
TECHNICAL CHARACTERISTICS (FLIS)
PRONG OUTSIDE DIAMETER1.0312 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER1.000 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL
OVERALL HEIGHT0.2968 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
MATERIALSTEEL
HEAD HEIGHT0.0781 INCHES NOMINAL IN
PRONG QUANTITY12
STYLE DESIGNATORSTANDARD
HEAD OUTSIDE DIAMETER1.1562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
18766Upgraded Successor
successor cross-reference
successor
7316Upgraded Successor
successor cross-reference
successor
D15-739YPC505-509Interchangeable
interchangeable cross-reference
interchangeable
D15-648NPC505-509Interchangeable
interchangeable cross-reference
interchangeable
D15-739XPC505-509Interchangeable
interchangeable cross-reference
interchangeable
316MFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1715AC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1715AC?
1715AC is a BUTTON,PLUG.
What parts can replace 1715AC?
There are 21 known substitutes for 1715AC: 18766, 7316, D15-739YPC505-509 and 18 more. Substitute compatibility should be verified for your specific system.
Is 1715AC still available?
1715AC is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1715AC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026