171585 — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

171585: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include height: 1.000 INCHES MINIMUM AND 1.100 INCHES MAXIMUM IN, material: STEEL HOUSING, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.218 INCHES MAXIMUM IN, body_height: 0.453 INCHES MAXIMUM IN, body_length: 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-932-0206, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 171585

NSN: 5910-00-932-0206
NIINs: 009320206, 013536066, 015924188
FSC: 5910 — Capacitors
CAGE: 57712 — TELEMECHANICS INC (USA)

SPECIFICATIONS

height	1.000 INCHES MINIMUM AND 1.100 INCHES MAXIMUM IN
material	STEEL HOUSING
body_style	W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width	0.218 INCHES MAXIMUM IN
body_height	0.453 INCHES MAXIMUM IN
body_length	0.750 INCHES MAXIMUM IN
overall_width	1.813 INCHES MINIMUM AND 1.870 INCHES MAXIMUM IN
overall_length	3.375 INCHES MINIMUM AND 3.380 INCHES MAXIMUM IN
terminal_length	1.000 INCHES MINIMUM IN
special_features	INSERT IS MADE OF RUBBER;0.250 INCH (NOM) SCREWS FOR MOUNTING ITEM ARE NOT INCLUDED;ID IS 1.000 INCH (NOM) IN
style_designator	ELONGATED W/RESILIENT RETAINER
surface_treatment	ZINC HOUSING
NSN	5910-00-932-0206

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.025 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES

•

TOLERANCE RANGE PER SECTION: -5.00 TO 5.00 PERCENT SINGLE SECTION

•

POWER FACTOR AT REFERENCE TEMP IN PERCENT: 1.0000

•

NONDERATED OPERATING TEMP: -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.000 INCHES MINIMUM IN

•

BODY WIDTH: 0.218 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.025 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION
POWER FACTOR AT REFERENCE TEMP IN PERCENT	1.0000
NONDERATED OPERATING TEMP	-40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.000 INCHES MINIMUM IN
BODY WIDTH	0.218 INCHES MAXIMUM IN
BODY HEIGHT	0.453 INCHES MAXIMUM IN
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	250.0 DC SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 171585?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 171585?

171585 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).

What is the NSN for 171585?

171585 is cataloged in the U.S. Government catalog under NSN 5910-00-932-0206. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

171585 — CAPACITOR,FIXED,METALLIZED,PAPER

Request a Quote — 171585