PartsTable / COMPONENT / 1714C
1714C
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.093 INCHES NOMINAL IN, overall_height: 0.296 INCHES NOMINAL IN, prong_quantity: 12, style_designator: STANDARD, surface_treatment: NICKEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-868-0384, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1714C
NSN: 5340-00-868-0384 FSC: 5340 CAGE: 72653 — GC/WALDOM INC (USA)
SPECIFICATIONS
material STEEL head_height 0.093 INCHES NOMINAL IN overall_height 0.296 INCHES NOMINAL IN prong_quantity 12 style_designator STANDARD surface_treatment NICKEL head_outside_diameter 0.937 INCHES NOMINAL IN prong_outside_diameter 0.765 INCHES NOMINAL IN end_item_identification W/S: AIRCRAFT, STRATOFORTRESS B-52; SUPPORT EQUIPMENT, T-37 AIRCRAFT; SUPPORT EQUIPMENT, T-38 AIRCRAFT hole_accommodation_diameter 0.750 INCHES NOMINAL IN material_accommodated_thickness 0.062 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN NSN 5340-00-868-0384
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1714C
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: STANDARD
• HEAD HEIGHT: 0.093 INCHES NOMINAL IN
• HOLE ACCOMMODATION DIAMETER: 0.750 INCHES NOMINAL IN
• SURFACE TREATMENT: NICKEL
• PRONG OUTSIDE DIAMETER: 0.765 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR STANDARD OVERALL HEIGHT 0.296 INCHES NOMINAL IN HEAD HEIGHT 0.093 INCHES NOMINAL IN HOLE ACCOMMODATION DIAMETER 0.750 INCHES NOMINAL IN PRONG QUANTITY 12 SURFACE TREATMENT NICKEL END ITEM IDENTIFICATION W/S: AIRCRAFT, STRATOFORTRESS B-52; SUPPORT EQUIPMENT, T-37 AIRCRAFT; SUPPORT EQUIPMENT, T-38 AIRCRAFT PRONG OUTSIDE DIAMETER 0.765 INCHES NOMINAL IN MATERIAL STEEL MATERIAL ACCOMMODATED THICKNESS 0.062 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
3505 Upgraded Successor successor cross-reference
successor
8888509737 Upgraded Successor successor cross-reference
successor
7314 Interchangeable interchangeable cross-reference
interchangeable
7314B Interchangeable interchangeable cross-reference
interchangeable
30314 Interchangeable interchangeable cross-reference
interchangeable
RBC7314 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1714C?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1714C?
1714C is a BUTTON,PLUG.
What parts can replace 1714C?
There are 18 known substitutes for 1714C: 3505, 8888509737, 7314 and 15 more. Substitute compatibility should be verified for your specific system.
Is 1714C still available?
1714C is currently cancelled.