PartsTable
Technical Data Sheet
Download PDF

1713299 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1713299: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.550 INCHES NOMINAL IN, overall_length: 5.840 INCHES NOMINAL IN, special_features: WITH TWO ADDITIONAL APERTURES WITH DIAMETERS OF 1.250 EACH LOCATED AT 1.045,2.795,AND 4.545 ALONG THE LENGTH, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-370-7046, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1713299
NSN: 5330-01-370-7046
FSC: 5330 — Packing and Gasket Materials
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.550 INCHES NOMINAL IN
overall_length5.840 INCHES NOMINAL IN
special_featuresWITH TWO ADDITIONAL APERTURES WITH DIAMETERS OF 1.250 EACH LOCATED AT 1.045,2.795,AND 4.545 ALONG THE LENGTH
style_designatorNON-CIRCULAR
aperture_diameter1.250 INCHES NOMINAL IN
bolt_hole_quantity4
cross-sectional_thickness0.120 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-6130,TYPE 2,GRADE A,COND MEDIUM MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
outside_corner_bevel_length_along_width0.060 INCHES NOMINAL IN
NSN5330-01-370-7046
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1713299 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6130,TYPE 2,GRADE A,COND MEDIUM MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.250 INCHES NOMINAL IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.120 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6130,TYPE 2,GRADE A,COND MEDIUM MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH5.840 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.550 INCHES NOMINAL IN
APERTURE DIAMETER1.250 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.060 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH0.060 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1713299?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1713299?
1713299 is a GASKET.
What is the NSN for 1713299?
1713299 is cataloged in the U.S. Government catalog under NSN 5330-01-370-7046. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1713299

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.