PartsTable
Technical Data Sheet
17120A ✓ Verified by PartsTable
InLine · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Active DisplayPort cable, suitable for the transmission of picture and sound signals over long distances. Areas of application are the connection of monitors to computers and notebooks, conference rooms, monitoring centres, etc. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-824-6260, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17120A
NSN: 5330-00-824-6260
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
temp_rating-50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
housing_bore_diameter4.374 INCHES MINIMUM AND 4.377 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.372 INCHES MINIMUM AND 3.378 INCHES MAXIMUM IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-824-6260
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17120A MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEALING ELEMENT STYLE: ANGULAR
TEMP RATING: -50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
SEAL WIDTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
CASE STYLE: SQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
MATERIAL: LEATHER SEALING ELEMENT
HOUSING BORE DIAMETER: 4.374 INCHES MINIMUM AND 4.377 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
TEMP RATING-50.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
SEAL WIDTH0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALLEATHER SEALING ELEMENT
HOUSING BORE DIAMETER4.374 INCHES MINIMUM AND 4.377 INCHES MAXIMUM IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER3.372 INCHES MINIMUM AND 3.378 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
55164Interchangeable
interchangeable cross-reference
interchangeable
SMB187073Interchangeable
interchangeable cross-reference
interchangeable
6416132Interchangeable
interchangeable cross-reference
interchangeable
078857Interchangeable
interchangeable cross-reference
interchangeable
D8HZ4573-CInterchangeable
interchangeable cross-reference
interchangeable
144EX495Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17120A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17120A?
17120A is a SEAL,PLAIN ENCASED manufactured by InLine.
What parts can replace 17120A?
There are 10 known substitutes for 17120A: 55164, SMB187073, 6416132 and 7 more. Substitute compatibility should be verified for your specific system.
Is 17120A still available?
17120A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17120A