PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1711-BC
1711-BC ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, style_designator: STANDARD, surface_treatment: NICKEL, head_outside_diameter: 0.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-122-3507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1711-BC
NSN: 5340-01-122-3507
FSC: 5340
CAGE: 72653 — GC/WALDOM INC (USA)
SPECIFICATIONS
materialSTEEL
head_height0.062 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
prong_quantity8
style_designatorSTANDARD
surface_treatmentNICKEL
head_outside_diameter0.438 INCHES NOMINAL IN
prong_outside_diameter0.328 INCHES NOMINAL IN
hole_accommodation_diameter0.312 INCHES NOMINAL IN
material_accommodated_thickness0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
NSN5340-01-122-3507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1711-BC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
PRONG QUANTITY: 8
•
MATERIAL ACCOMMODATED THICKNESS: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
HOLE ACCOMMODATION DIAMETER: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL
•
STYLE DESIGNATOR: STANDARD
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.062 INCHES NOMINAL IN
PRONG QUANTITY8
MATERIAL ACCOMMODATED THICKNESS0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
HOLE ACCOMMODATION DIAMETER0.312 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL
STYLE DESIGNATORSTANDARD
OVERALL HEIGHT0.250 INCHES NOMINAL IN
MATERIALSTEEL
PRONG OUTSIDE DIAMETER0.328 INCHES NOMINAL IN
HEAD OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
21458Upgraded Successor
successor cross-reference
successor
11348Upgraded Successor
successor cross-reference
successor
UJ465Interchangeable
interchangeable cross-reference
interchangeable
M11348Interchangeable
interchangeable cross-reference
interchangeable
671235Interchangeable
interchangeable cross-reference
interchangeable
P-301 ITEM 8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1711-BC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1711-BC?
1711-BC is a BUTTON,PLUG.
What parts can replace 1711-BC?
There are 10 known substitutes for 1711-BC: 21458, 11348, UJ465 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1711-BC?
1711-BC is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-122-3507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1711-BC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026