PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 171071
171071 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER AND STEEL OVERALL, seal_width: 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, construction: SPLIT, housing_bore_diameter: 1.002 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN, accommodated_shaft_diameter: 0.703 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN, cross-sectional_shape_style: SINGLE LIP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-080-0111, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
171071
NSN: 5340-00-080-0111
FSC: 5340
CAGE: 78710 — TRIUMPH CONTROLS, LLC DBA TRIUMPH CONTROLS, LLC (USA)
SPECIFICATIONS
materialRUBBER AND STEEL OVERALL
seal_width0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
constructionSPLIT
housing_bore_diameter1.002 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN
accommodated_shaft_diameter0.703 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN
cross-sectional_shape_styleSINGLE LIP
NSN5340-00-080-0111
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 171071 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.781 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.531 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5515 ASSN STD SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.312 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.781 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.531 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5515 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER0.203 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
VEL/171071Interchangeable
interchangeable cross-reference
interchangeable
171071Interchangeable
interchangeable cross-reference
interchangeable
1000240Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 171071?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 171071?
171071 is a CLAMP,LOOP.
What parts can replace 171071?
There are 3 known substitutes for 171071: VEL/171071, 171071, 1000240. Substitute compatibility should be verified for your specific system.
What is the NSN for 171071?
171071 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-080-0111. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 171071

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026