PartsTable
Technical Data Sheet
17101PC6 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER NEOPRENE OVERALL, end_item_identification: CVN-21 PWU HEATER SECTIONAL ASSEMBLY, material_document_and_classification: MIL-T-24696 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL, part_name_assigned_by_controlling_agency: GASKET, 12 NPS FLANGE CL 300. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-596-5150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17101PC6
NSN: 5330-01-596-5150
FSC: 5330
CAGE: 62144 — PARKER HANNIFIN CORPORATION DIV VILLAGE MARINE TECH (USA)
SPECIFICATIONS
materialRUBBER NEOPRENE OVERALL
end_item_identificationCVN-21 PWU HEATER SECTIONAL ASSEMBLY
material_document_and_classificationMIL-T-24696 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyGASKET, 12 NPS FLANGE CL 300
NSN5330-01-596-5150
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17101PC6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER NEOPRENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-T-24696 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONCVN-21 PWU HEATER SECTIONAL ASSEMBLY
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET, 12 NPS FLANGE CL 300
MATERIALRUBBER NEOPRENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-T-24696 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
30-024-1Interchangeable
interchangeable cross-reference
interchangeable
1320-D633Interchangeable
Projectile,8 Inch
interchangeable
294261Interchangeable
Projectile,8 Inch
interchangeable
294196Interchangeable
Projectile,8 Inch
interchangeable
387553Interchangeable
Projectile,8 Inch
interchangeable
249-128PC7AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17101PC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17101PC6?
17101PC6 is a GASKET.
What parts can replace 17101PC6?
There are 12 known substitutes for 17101PC6: 30-024-1, 1320-D633, 294261 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17101PC6?
17101PC6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-596-5150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17101PC6