PartsTable
Technical Data Sheet
Download PDF

171-4 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

171-4: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL CORROSION RESISTING OVERALL, end_style: 90 DEGREE PARALLEL, thickness: 0.062 INCHES NOMINAL IN, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, ring_style: STRAIGHT GAP. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-008-2107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 171-4
NSN: 5310-00-008-2107
NIINs: 000082107, 000283911, 002862973, 004024228, 005404443, 005649500, 007335462, 007411354, 007995682, 009729576, 009955600, 011271336, 011802725, 012163962, 012234349, 012382644, 012664452, 013383953, 013619196, 015688557, 015872917, 016236414, 017026093
FSC: 5310 — Nuts and Washers
CAGE: 81400 — HASKEL INTERNATIONAL, LLC DBA HASKEL INTERNATIONAL, LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
end_style90 DEGREE PARALLEL
thickness0.062 INCHES NOMINAL IN
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
ring_styleSTRAIGHT GAP
tooth_formSTANDARD
body_length1.750 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
usage_designEXTERNAL
body_diameter4.300 INCHES NOMINAL IN
cubic_measure0.135 CUBIC INCHES
NSN5310-00-008-2107
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 171-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
CNF00027Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
1673208Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 171-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 171-4?
171-4 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 171-4?
There are 2 known substitutes for 171-4: CNF00027, 1673208. Substitute compatibility should be verified for your specific system.
What is the NSN for 171-4?
171-4 is cataloged in the U.S. Government catalog under NSN 5310-00-008-2107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 171-4