PartsTable
Technical Data Sheet
PartsTable / MRO / 171-22
171-22 ✓ Verified by PartsTable
InLine · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Cable to connect devices with a mini DisplayPort connection to the Macbook etc. Key specifications include width: 0.375 INCHES NOMINAL IN, height: 0.187 INCHES NOMINAL IN, length: 0.475 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, body_style: PISTON, thread_class: 2A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-102-1383, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 171-22
NSN: 5340-00-102-1383
FSC: 5340
CAGE: 00048 — ABRAMS INSTRUMENT CORPORATION (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
height0.187 INCHES NOMINAL IN
length0.475 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING OVERALL
body_stylePISTON
thread_class2A A
end_item_nameMOTOR-GENERATOR
hole_diameter0.078 INCHES NOMINAL IN
inclosure_typeENCASED
overall_length46.0 MILLIMETERS NOMINAL MM
furnished_itemsLOCKNUT
special_featuresUSED ON NSN 6125-01-373-2793
NSN5340-00-102-1383
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 171-22 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
WIDTH: 0.375 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2A A
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
•
HEIGHT: 0.187 INCHES NOMINAL IN
•
LENGTH: 0.421 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYAMIDE NYLON
WIDTH0.375 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
NOMINAL THREAD SIZE0.086 INCHES IN
HEIGHT0.187 INCHES NOMINAL IN
LENGTH0.421 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-N-18352 MIL SPEC SINGLE MATERIAL RESPONSE
HOLE DIAMETER0.078 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
6515NCM104817Upgraded Successor
successor cross-reference
successor
17122Upgraded Successor
successor cross-reference
successor
202.965Upgraded Successor
successor cross-reference
successor
15120Interchangeable
interchangeable cross-reference
interchangeable
53007Interchangeable
interchangeable cross-reference
interchangeable
1114500Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 171-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 171-22?
171-22 is a CAPACITOR,VARIABLE,CERAMIC DIELE manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What parts can replace 171-22?
There are 11 known substitutes for 171-22: 6515NCM104817, 17122, 202.965 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 171-22?
171-22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-102-1383. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 171-22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026