PartsTable
Technical Data Sheet
Download PDF

170993 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

170993: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL UNS K08500 OVERALL, end_style: SPRING END,PLAIN BOTH ENDS, coil_quantity: 6-1/10, inside_diameter: 0.282 INCHES NOMINAL IN, style_designator: CYLINDRICAL, spring_free_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-141-3633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
170993
NSN: 5310-00-141-3633
NIINs: 001413633, 009871243
FSC: 5310 — Nuts and Washers
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL UNS K08500 OVERALL
end_styleSPRING END,PLAIN BOTH ENDS
coil_quantity6-1/10
inside_diameter0.282 INCHES NOMINAL IN
style_designatorCYLINDRICAL
spring_free_length0.750 INCHES NOMINAL IN
spring_solid_length0.179 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_deflection_rate2.732 POUNDS PER INCH NOMINAL LBS
spring_free_outside_diameter0.330 INCHES NOMINAL IN
material_document_and_classificationQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-141-3633
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 170993 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD PITCH DIAMETERS: +0.1708 TO 0.1723 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD PITCH DIAMETERS+0.1708 TO 0.1723 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 170993?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170993?
170993 is a SPRING,HELICAL,COMPRESSION.
What is the NSN for 170993?
170993 is cataloged in the U.S. Government catalog under NSN 5310-00-141-3633. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170993