PartsTable
Technical Data Sheet
17098 ✓ Verified by PartsTable
schleich · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Pandas have a striking black and white coat that makes it easier for other pandas to spot them in dense woodland.<br><br>Pandas have a striking black and white coat that makes it easier for other pandas to spot them in dense woodland. Scientists are sure this must be the explanation for it, since pandas don't need to worry about camouflaging themselves. They are so large and heavy that they have no natural enemies.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3166, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 17098
NSN: 3110-00-100-3166
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
cone_width0.6522 INCHES NOMINAL IN
body_length6.000 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
body_diameter1.125 INCHES NOMINAL IN
bore_diameter0.9835 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
exterior_colorBLACK
inclosure_typeUNINCLOSED
overall_length44.0 MILLIMETERS NOMINAL MM
inside_diameter0.312 INCHES NOMINAL IN
outside_diameter0.562 INCHES NOMINAL IN
NSN3110-00-100-3166
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 17098 · schleich ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CONE WIDTH: 0.6522 INCHES NOMINAL IN
BORE DIAMETER: 0.9835 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
STYLE DESIGNATOR: NORMAL ANGLE
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH0.6522 INCHES NOMINAL IN
BORE DIAMETER0.9835 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
1595500Interchangeable
interchangeable cross-reference
interchangeable
NW31841Interchangeable
interchangeable cross-reference
interchangeable
27003Interchangeable
interchangeable cross-reference
interchangeable
17546Interchangeable
interchangeable cross-reference
interchangeable
24615Interchangeable
interchangeable cross-reference
interchangeable
L-13006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17098?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17098?
17098 is a SPINDLE,MECHANICALLY ACTUATED manufactured by schleich. It is classified as a MRO (MRO_GENERAL).
What parts can replace 17098?
There are 13 known substitutes for 17098: 1595500, NW31841, 27003 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17098?
17098 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3166. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17098