PartsTable
Technical Data Sheet
PartsTable / MRO / 170865
170865 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 2.000 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 0.812 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2811, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 170865
NSN: 3110-00-227-2811
FSC: 3110
CAGE: 55284 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE-SOUTH BEND (WESTMOOR ST) (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
body_length2.000 INCHES NOMINAL IN
shaft_styleROUND
shaft_length0.812 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.812 INCHES NOMINAL IN
bore_diameter2.2500 INCHES NOMINAL IN
alignment_typeRIGID
lateral_runout0.003 INCHES IN
shaft_diameter0.375 INCHES NOMINAL IN
shaft_end_play0.00500 INCHES IN
NSN3110-00-227-2811
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 170865 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
INNER RING WIDTH: 1.2500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
OUTER RING WIDTH: 1.0490 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER AND OUTER RING
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
INNER RING WIDTH1.2500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
OUTER RING WIDTH1.0490 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER2.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER3.0000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
2Interchangeable
interchangeable cross-reference
interchangeable
74810P2Interchangeable
interchangeable cross-reference
interchangeable
HA4499Interchangeable
interchangeable cross-reference
interchangeable
5210PL0930733Interchangeable
interchangeable cross-reference
interchangeable
7079601Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-111 TY1CL3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 170865?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170865?
170865 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 170865?
There are 31 known substitutes for 170865: 2, 74810P2, HA4499 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 170865?
170865 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2811. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170865

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026