PartsTable
Technical Data Sheet
Download PDF

170605 — SLAVE CONTROLLER MO

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

170605: SLAVE CONTROLLER MO.

The SLAVE CONTROLLER MO is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, outside_diameter: 0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.018 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-3990, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 170605
NSN: 5310-00-209-3990
NIINs: 002093990, 013449868
FSC: 5310 — Nuts and Washers
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
outside_diameter0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentPASSIVATE OVERALL
material_thickness0.018 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-209-3990
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 170605 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.018 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 302 OVERALL
•
HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
MATERIAL THICKNESS0.018 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 302 OVERALL
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
1706-00-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
236-1040P3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5310002093990Reference document
Same NSN cross-reference
Reference document — Secondary reference
170-6000-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
636122-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
10403Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 170605?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170605?
170605 is a SLAVE CONTROLLER MO. It is classified as a MRO (MRO_GENERAL).
What parts can replace 170605?
There are 8 known substitutes for 170605: 1706-00-00, 236-1040P3, 5310002093990 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 170605?
170605 is cataloged in the U.S. Government catalog under NSN 5310-00-209-3990. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170605

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.