PartsTable
Technical Data Sheet
Download PDF

170601 — DISC CONTROL MODULE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

170601: DISC CONTROL MODULE.

The DISC CONTROL MODULE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, outside_diameter: 0.255 INCHES NOMINAL IN, special_features: 6 GALLON, style_designator: FLAT INTERNAL TEETH, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-3868, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 170601
NSN: 5310-00-209-3868
NIINs: 002093868, 010838720, 013449867, 017262237
FSC: 5310 — Nuts and Washers
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
outside_diameter0.255 INCHES NOMINAL IN
special_features6 GALLON
style_designatorFLAT INTERNAL TEETH
surface_treatmentPASSIVATE OVERALL
material_thickness0.018 INCHES NOMINAL IN
voltage_in_volts_and_current_type120.0 AC
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyWATER HEATER
NSN5310-00-209-3868
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 170601 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.255 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.018 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 410 OVERALL
•
HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.255 INCHES NOMINAL IN
MATERIAL THICKNESS0.018 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 410 OVERALL
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
410894-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 170601?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170601?
170601 is a DISC CONTROL MODULE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 170601?
There is 1 known substitute for 170601: 410894-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 170601?
170601 is cataloged in the U.S. Government catalog under NSN 5310-00-209-3868. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170601

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.