PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 170510
170510 ✓ Verified by PartsTable
Ricoh · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TUBE,BENT,METALLIC is a Ricoh industrial component. Key specifications include material: STEEL COMP 1040 OVERALL, head_style: HEXAGON, head_height: 0.359 INCHES NOMINAL IN, thread_class: 2A A, fastener_length: 1.000 INCHES NOMINAL IN, hardness_rating: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-632-6182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
170510
NSN: 5330-00-632-6182
FSC: 5330
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1040 OVERALL
head_styleHEXAGON
head_height0.359 INCHES NOMINAL IN
thread_class2A A
fastener_length1.000 INCHES NOMINAL IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC AND DICHROMATE OVERALL
width_between_flats0.812 INCHES NOMINAL IN
nominal_thread_diameter0.562 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch12
NSN5330-00-632-6182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 170510 MFR: Ricoh ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.188 INCHES NOMINAL IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH2.375 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.188 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH0.188 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALPAPER OVERALL
OVERALL WIDTH2.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
170510Interchangeable
interchangeable cross-reference
interchangeable
803-510Interchangeable
interchangeable cross-reference
interchangeable
903-510Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 170510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170510?
170510 is a TUBE,BENT,METALLIC manufactured by Ricoh.
What parts can replace 170510?
There are 3 known substitutes for 170510: 170510, 803-510, 903-510. Substitute compatibility should be verified for your specific system.
What is the NSN for 170510?
170510 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-632-6182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170510

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026