17043-400 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

17043-400: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-282-8415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

17043-400

NSN: 5305-00-282-8415
FSC: 5305 — Screws
CAGE: 7H468 — CONTINENTAL ELECTRIC MOTORS, INC. (USA)

SPECIFICATIONS

head_style	FILLISTER
head_height	0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
hole_diameter	0.046 INCHES NOMINAL IN
hole_quantity	1
thread_length	0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
screw_material	COPPER ALLOY
fastener_length	0.375 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.138 INCHES IN
NSN	5305-00-282-8415

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.375 INCHES NOMINAL IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.138 INCHES IN

•

HEAD STYLE: FILLISTER

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: COPPER ALLOY

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
FASTENER LENGTH	0.375 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.138 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	COPPER ALLOY
MINIMUM TENSILE STRENGTH	55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1

SUBSTITUTES & CROSS-REFERENCES 3

FFS92TYPE1STYLE5SReference document

Same NSN cross-reference

Reference document — Identification reference

AN500AB6-6Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS35271-28Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 17043-400?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 17043-400?

17043-400 is a SCREW,MACHINE.

What parts can replace 17043-400?

There are 3 known substitutes for 17043-400: FFS92TYPE1STYLE5S, AN500AB6-6, MS35271-28. Substitute compatibility should be verified for your specific system.

What is the NSN for 17043-400?

17043-400 is cataloged in the U.S. Government catalog under NSN 5305-00-282-8415. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

17043-400 — SCREW,MACHINE

Request a Quote — 17043-400