PartsTable
Technical Data Sheet
PartsTable / MRO / 170323
170323 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 170323 is a the manufacturer industrial component. Key specifications include length: 2.062 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN, material: STEEL COMP 302 OVERALL, distance_from_loop_center_to_end: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN, material_document_and_classification: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-759-2714, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 170323
NSN: 5340-00-759-2714
FSC: 5340
CAGE: U5588 — POTTER & BRUMFIELD (GBR)
SPECIFICATIONS
length2.062 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN
materialSTEEL COMP 302 OVERALL
distance_from_loop_center_to_end1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-759-2714
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 170323 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.062 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 OVERALL
•
DISTANCE FROM LOOP CENTER TO END: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH2.062 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302 OVERALL
DISTANCE FROM LOOP CENTER TO END1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
548071G0002Interchangeable
interchangeable cross-reference
interchangeable
MY5353Interchangeable
interchangeable cross-reference
interchangeable
294-990060-809Interchangeable
interchangeable cross-reference
interchangeable
535-0054Interchangeable
interchangeable cross-reference
interchangeable
2100-2867Interchangeable
interchangeable cross-reference
interchangeable
535-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 170323?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170323?
170323 is a 170323. It is classified as a MRO (MRO_GENERAL).
What parts can replace 170323?
There are 27 known substitutes for 170323: 548071G0002, MY5353, 294-990060-809 and 24 more. Substitute compatibility should be verified for your specific system.
Is 170323 still available?
170323 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170323

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026