PartsTable
Technical Data Sheet
Download PDF

1701-3-4 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1701-3-4: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include FSC APPLICATION DATA: TELETYPE AND FACSIMILE EQUIPMENT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-683-1712, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1701-3-4
NSN: 5905-00-683-1712
NIINs: 006831712, 009501329, 013341049
FSC: 5905 — Resistor
CAGE: 02111 — VISHAY SPRAGUE INC (USA)
SPECIFICATIONS
FSC APPLICATION DATATELETYPE AND FACSIMILE EQUIPMENT
NSN5905-00-683-1712
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 1701-3-4 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.55 INCH-OUNCES IN
•
BODY DIAMETER: 1.453 INCHES NOMINAL IN
•
LATERAL RUNOUT: 0.002 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 97.0 KILOHMS 1ST SECTION AND 97.0 KILOHMS 2ND SECTION AND 97.0 KILOHMS 3RD SECTION AND 97.0 KILOHMS 4TH SECTION AND 140.0 KILOHMS 5TH SECTION
•
MOUNTING LIP DEPTH: 0.0730 INCHES MAXIMUM IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 ALL SECTIONS
•
UNDERCUT WIDTH: 0.0930 INCHES NOMINAL IN
•
SECTION QUANTITY: 5
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.55 INCH-OUNCES IN
BODY DIAMETER1.453 INCHES NOMINAL IN
LATERAL RUNOUT0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION97.0 KILOHMS 1ST SECTION AND 97.0 KILOHMS 2ND SECTION AND 97.0 KILOHMS 3RD SECTION AND 97.0 KILOHMS 4TH SECTION AND 140.0 KILOHMS 5TH SECTION
MOUNTING LIP DEPTH0.0730 INCHES MAXIMUM IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
UNDERCUT WIDTH0.0930 INCHES NOMINAL IN
SECTION QUANTITY5
SHAFT DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER1.453 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
1277408Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
749-6030Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1701-3-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1701-3-4?
1701-3-4 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1701-3-4?
There are 2 known substitutes for 1701-3-4: 1277408, 749-6030. Substitute compatibility should be verified for your specific system.
What is the NSN for 1701-3-4?
1701-3-4 is cataloged in the U.S. Government catalog under NSN 5905-00-683-1712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1701-3-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.