PartsTable
Technical Data Sheet
Download PDF

1700AS969 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1700AS969: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL, hole_diameter: 0.220 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, style_designator: DONUT TOP COUNTERBORED, first_counterbore_depth: 0.313 INCHES NOMINAL IN, first_counterbore_diameter: 0.310 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-889-3263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1700AS969
NSN: 5340-00-889-3263
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER NATURAL
hole_diameter0.220 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
style_designatorDONUT TOP COUNTERBORED
first_counterbore_depth0.313 INCHES NOMINAL IN
first_counterbore_diameter0.310 INCHES NOMINAL IN
outside/top_flange_diameter0.880 INCHES NOMINAL IN
NSN5340-00-889-3263
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1700AS969 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 0.880 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.310 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DONUT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.313 INCHES NOMINAL IN
•
MATERIAL: RUBBER NATURAL
•
HOLE DIAMETER: 0.220 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.880 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.310 INCHES NOMINAL IN
STYLE DESIGNATORDONUT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.313 INCHES NOMINAL IN
MATERIALRUBBER NATURAL
HOLE DIAMETER0.220 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
6259-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
723898-901Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1700AS969?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1700AS969?
1700AS969 is a BUMPER.
What parts can replace 1700AS969?
There are 2 known substitutes for 1700AS969: 6259-2, 723898-901. Substitute compatibility should be verified for your specific system.
What is the NSN for 1700AS969?
1700AS969 is cataloged in the U.S. Government catalog under NSN 5340-00-889-3263. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1700AS969

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.