PartsTable
Technical Data Sheet
Download PDF

17004-2 — 17004-2

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

17004-2: 17004-2.

The 17004-2 is a the manufacturer industrial component. Key specifications include end_item_identification: AN/GGC-15. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-205-8801, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17004-2
NSN: 5310-00-205-8801
NIINs: 002058801, 006133785, 007972502, 009080633
FSC: 5310 — Nuts and Washers
CAGE: 00048 — ABRAMS INSTRUMENT CORPORATION (USA)
SPECIFICATIONS
end_item_identificationAN/GGC-15
NSN5310-00-205-8801
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 17004-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-746-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
THICKNESS: 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-746-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALCOPPER ALLOY OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
THICKNESS0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
79374510415Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
745513-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
45513-4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 17004-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17004-2?
17004-2 is a 17004-2.
What parts can replace 17004-2?
There are 3 known substitutes for 17004-2: 79374510415, 745513-4, 45513-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 17004-2?
17004-2 is cataloged in the U.S. Government catalog under NSN 5310-00-205-8801. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17004-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.