PartsTable
Technical Data Sheet
PartsTable / O-RING / 17001PC10
17001PC10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include center_hole_diameter: 42.500 INCHES NOMINAL IN, cross-sectional_height: 0.500 INCHES NOMINAL IN, end_item_identification: CVN 78 POTABLE WATER UNIT 3-MICRON FILTER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-596-3592, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17001PC10
NSN: 5331-01-596-3592
FSC: 5331 — O-RING
CAGE: 62144 — PARKER HANNIFIN CORPORATION DIV VILLAGE MARINE TECH (USA)
SPECIFICATIONS
center_hole_diameter42.500 INCHES NOMINAL IN
cross-sectional_height0.500 INCHES NOMINAL IN
end_item_identificationCVN 78 POTABLE WATER UNIT 3-MICRON FILTER
NSN5331-01-596-3592
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17001PC10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 42.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
CENTER HOLE DIAMETER42.500 INCHES NOMINAL IN
END ITEM IDENTIFICATIONCVN 78 POTABLE WATER UNIT 3-MICRON FILTER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
6800-3042Interchangeable
interchangeable cross-reference
interchangeable
2135066G-024Interchangeable
interchangeable cross-reference
interchangeable
2273873-0001Interchangeable
interchangeable cross-reference
interchangeable
300388Interchangeable
interchangeable cross-reference
interchangeable
BRD2-LW228Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17001PC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17001PC10?
17001PC10 is a O-RING.
What parts can replace 17001PC10?
There are 5 known substitutes for 17001PC10: 6800-3042, 2135066G-024, 2273873-0001 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17001PC10?
17001PC10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-596-3592. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17001PC10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026