PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 170006
170006 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include shelf: INCLUDED, leg_type: FOLDING, material: STEEL CORROSION RESISTING TOP, mounting_type: FLOOR, overall_depth: 4.0 INCHES NOMINAL IN, overall_width: 26.0 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-076-7436, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
170006
NSN: 5340-01-076-7436
FSC: 5340
CAGE: 08904 — CONRAC SYSTEMS INC (USA)
SPECIFICATIONS
shelfINCLUDED
leg_typeFOLDING
materialSTEEL CORROSION RESISTING TOP
mounting_typeFLOOR
overall_depth4.0 INCHES NOMINAL IN
overall_width26.0 INCHES NOMINAL IN
overall_height24.5 INCHES MINIMUM AND 34.5 INCHES MAXIMUM IN
overall_length48.0 INCHES NOMINAL IN
drawer_quantity1
special_featuresADJUSTABLE HEIGHT LEGS IN 1 INCH INCREMENTS IN
overhead_utensil_rackNOT INCLUDED
part_name_assigned_by_controlling_agencyFIELD TABLE
NSN5340-01-076-7436
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 170006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.094 INCHES MINIMUM MEMBER IN
•
DESIGN TYPE: DEAD BOLT
•
OPERATION METHOD: OUTSIDE KEY DEAD BOLT
•
KEY CHANGE QUANTITY: 200
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.094 INCHES MINIMUM MEMBER IN
SPECIAL FEATURESLOCKING MECHANISM TYPE:DISK TUMBLER;MASTER KEY PROVISION:NOT INCLUDED;
DESIGN TYPEDEAD BOLT
OPERATION METHODOUTSIDE KEY DEAD BOLT
KEY CHANGE QUANTITY200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
3174Upgraded Successor
successor cross-reference
successor
8338865Interchangeable
interchangeable cross-reference
interchangeable
3M1584Interchangeable
interchangeable cross-reference
interchangeable
7400TN-018Interchangeable
interchangeable cross-reference
interchangeable
COBAN 1584Interchangeable
interchangeable cross-reference
interchangeable
352-11-03-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 170006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170006?
170006 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 170006?
There are 12 known substitutes for 170006: 3174, 8338865, 3M1584 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 170006?
170006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-076-7436. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026