170-601003H-0643 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

170-601003H-0643: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 12.0 DEGREES SECOND END, temp_rating: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.344 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-356-4564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

170-601003H-0643

NSN: 4720-01-356-4564
FSC: 4720 — Hose and Flexible Tubing
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)

SPECIFICATIONS

flow_angle	90.0 DEGREES SECOND END
seat_angle	12.0 DEGREES SECOND END
temp_rating	-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class	3B FIRST END
connection_type	THREADED INTERNAL TUBE SECOND END
inside_diameter	0.344 INCHES NOMINAL IN
connection_style	SWIVEL NUT FLARE SECOND END
outside_diameter	0.570 INCHES NOMINAL IN
thread_direction	RIGHT-HAND FIRST END
operating_pressure	1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure	6000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size	0.750 INCHES FIRST END IN
NSN	4720-01-356-4564

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW ANGLE: 45.0 DEGREES FIRST END

•

MEASURING METHOD AND LENGTH: 64.375 INCHES NOMINAL OVERALL IN

•

TEMP RATING: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 2.500 INCHES IN

•

CONNECTION STYLE: SWIVEL NUT FLARE SECOND END

•

END CONNECTION DESIGN: ELBOW SECOND END

TECHNICAL CHARACTERISTICS

FLOW ANGLE	45.0 DEGREES FIRST END
FLOW ANGLE	90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH	64.375 INCHES NOMINAL OVERALL IN
TEMP RATING	-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	2.500 INCHES IN
CONNECTION STYLE	SWIVEL NUT FLARE SECOND END
CONNECTION STYLE	SWIVEL NUT FLARE FIRST END
END CONNECTION DESIGN	ELBOW SECOND END
END CONNECTION DESIGN	ELBOW FIRST END
LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE

OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

4720-00-000-0080 4720-00-000-0081 4720-00-000-0084 4720-00-000-0724 4720-00-001-0014 4720-00-001-0015 4720-00-001-0023 4720-00-001-0025

SUBSTITUTES & CROSS-REFERENCES 2

SS43Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

SS43D08C643170Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 170-601003H-0643?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 170-601003H-0643?

170-601003H-0643 is a HOSE ASSEMBLY,NONMETALLIC.

What parts can replace 170-601003H-0643?

There are 2 known substitutes for 170-601003H-0643: SS43, SS43D08C643170. Substitute compatibility should be verified for your specific system.

What is the NSN for 170-601003H-0643?

170-601003H-0643 is cataloged in the U.S. Government catalog under NSN 4720-01-356-4564. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

170-601003H-0643 — HOSE ASSEMBLY,NONMETALLIC

Request a Quote — 170-601003H-0643