PartsTable
Technical Data Sheet
PartsTable / MRO / 170-165
170-165 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: COPPER ALLOY OVERALL, nut_style: SLEEVE, body_style: CYLINDRICAL SERVO MOUNTED, nut_length: 1.500 INCHES NOMINAL IN, body_length: 1.580 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-216-7980, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 170-165
NSN: 5310-00-216-7980
FSC: 5310
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleSLEEVE
body_styleCYLINDRICAL SERVO MOUNTED
nut_length1.500 INCHES NOMINAL IN
body_length1.580 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeBALL SHAFT
nut_diameter1.875 INCHES NOMINAL IN
pilot_length0.06200 INCHES NOMINAL IN
shaft_length0.688 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
thread_class2B
NSN5310-00-216-7980
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 170-165 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT DIAMETER: 1.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: ROUND NUT
•
NOMINAL THREAD SIZE: 1.188 INCHES IN
•
THREAD QUANTITY PER INCH: 12
•
MATERIAL: COPPER ALLOY OVERALL
•
NUT LENGTH: 1.500 INCHES NOMINAL IN
•
THREAD CLASS: 2B
•
NUT STYLE: SLEEVE
TECHNICAL CHARACTERISTICS (FLIS)
NUT DIAMETER1.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND NUT
NOMINAL THREAD SIZE1.188 INCHES IN
THREAD QUANTITY PER INCH12
MATERIALCOPPER ALLOY OVERALL
NUT LENGTH1.500 INCHES NOMINAL IN
THREAD CLASS2B
NUT STYLESLEEVE
THREAD LENGTH1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
170-165Interchangeable
interchangeable cross-reference
interchangeable
67-322Interchangeable
interchangeable cross-reference
interchangeable
SL5634PC83Interchangeable
Same NIIN cross-reference
interchangeable
SL6435PC38Interchangeable
Same NIIN cross-reference
interchangeable
SL4367PC83Interchangeable
Same NIIN cross-reference
interchangeable
RX63233PC38Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 170-165?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170-165?
170-165 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 170-165?
There are 11 known substitutes for 170-165: 170-165, 67-322, SL5634PC83 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 170-165?
170-165 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-216-7980. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170-165

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026