PartsTable
Technical Data Sheet
PartsTable / MRO / 170-101
170-101 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: SELENIUM, load_type: INDUCTIVE OR RESISTIVE, temp_rating: 40.0 CELSIUS DEGC, bore_diameter: 0.8750 INCHES NOMINAL IN, overall_width: 1.500 INCHES NOMINAL IN, terminal_type: SOLDER LUG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3310, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 170-101
NSN: 3110-00-120-3310
FSC: 3110
CAGE: 96317 — PRECISION MACHINE WORKS INC (USA)
SPECIFICATIONS
materialSELENIUM
load_typeINDUCTIVE OR RESISTIVE
temp_rating40.0 CELSIUS DEGC
bore_diameter0.8750 INCHES NOMINAL IN
overall_width1.500 INCHES NOMINAL IN
terminal_typeSOLDER LUG
alignment_typeRIGID
overall_height1.500 INCHES NOMINAL IN
overall_length2.438 INCHES NOMINAL IN
stack_quantity1
mounting_methodSTUD(S)
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
NSN3110-00-120-3310
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 170-101 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
OVERALL OUTSIDE DIAMETER: 1.3750 INCHES NOMINAL IN
•
BORE DIAMETER: 0.8750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
LUBRICATION MATERIALOIL LUBRICATING
OVERALL WIDTH0.7500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.3750 INCHES NOMINAL IN
BORE DIAMETER0.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
2331Interchangeable
interchangeable cross-reference
interchangeable
7173Interchangeable
interchangeable cross-reference
interchangeable
BK12930-68Interchangeable
interchangeable cross-reference
interchangeable
20503Interchangeable
interchangeable cross-reference
interchangeable
SRNTC125Interchangeable
interchangeable cross-reference
interchangeable
MW1453Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 170-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 170-101?
170-101 is a BEARING,ROLLER,NEEDLE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 170-101?
There are 16 known substitutes for 170-101: 2331, 7173, BK12930-68 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 170-101?
170-101 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3310. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 170-101

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026