PartsTable
Technical Data Sheet
Download PDF

17-60500-23 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

17-60500-23: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT CHAMFER, key_length: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, nut_length: 1.175 INCHES MINIMUM AND 1.205 INCHES MAXIMUM IN, head_height: 0.030 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-687-9928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17-60500-23
NSN: 5310-01-687-9928
FSC: 5310 — Nuts and Washers
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT CHAMFER
key_length0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
nut_length1.175 INCHES MINIMUM AND 1.205 INCHES MAXIMUM IN
head_height0.030 INCHES NOMINAL IN
nut_diameter0.390 INCHES MAXIMUM IN
shank_end_typeCLOSED
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
nominal_thread_size0.250 INCHES IN
end_item_identification6115-01-671-8118
NSN5310-01-687-9928
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 17-60500-23 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.030 INCHES NOMINAL IN
•
NUT LENGTH: 1.175 INCHES MINIMUM AND 1.205 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
SHANK END TYPE: CLOSED
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.390 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.030 INCHES NOMINAL IN
NUT LENGTH1.175 INCHES MINIMUM AND 1.205 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SHANK END TYPECLOSED
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.390 INCHES MAXIMUM IN
KEY LENGTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
17-60500Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 17-60500-23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17-60500-23?
17-60500-23 is a NUT,PLAIN,BLIND RIVET.
What parts can replace 17-60500-23?
There is 1 known substitute for 17-60500-23: 17-60500. Substitute compatibility should be verified for your specific system.
What is the NSN for 17-60500-23?
17-60500-23 is cataloged in the U.S. Government catalog under NSN 5310-01-687-9928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17-60500-23

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.