PartsTable
Technical Data Sheet
Download PDF

17-21003-00 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

17-21003-00: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include overall_length: 2.380 INCHES NOMINAL IN, aperture_diameter: 0.930 INCHES NOMINAL IN, bolt_circle_diameter: 0.330 INCHES NOMINAL IN, end_item_identification: 4110-01-534-7675, part_name_assigned_by_controlling_agency: GASKET,SERVICE VALVE. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-377-1604, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17-21003-00
NSN: 5330-01-377-1604
NIINs: 013771604, 015849605
FSC: 5330 — Packing and Gasket Materials
CAGE: 10855 — CARRIER CORP (USA)
SPECIFICATIONS
overall_length2.380 INCHES NOMINAL IN
aperture_diameter0.930 INCHES NOMINAL IN
bolt_circle_diameter0.330 INCHES NOMINAL IN
end_item_identification4110-01-534-7675
part_name_assigned_by_controlling_agencyGASKET,SERVICE VALVE
NSN5330-01-377-1604
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17-21003-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 1.188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.989 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
•
BOLT CIRCLE DIAMETER: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER1.188 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.375 INCHES NOMINAL IN
APERTURE DIAMETER0.989 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER1.625 INCHES NOMINAL IN
SPECIAL FEATURESITEM CONTAINS NON ASBESTOS MATERIAL;PKG OF 12
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
SUBSTITUTES & CROSS-REFERENCES 3
6D23-1421Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
62-10404-00 PG13 ITEM 157Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6D40-1421Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 17-21003-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17-21003-00?
17-21003-00 is a GASKET.
What parts can replace 17-21003-00?
There are 3 known substitutes for 17-21003-00: 6D23-1421, 62-10404-00 PG13 ITEM 157, 6D40-1421. Substitute compatibility should be verified for your specific system.
What is the NSN for 17-21003-00?
17-21003-00 is cataloged in the U.S. Government catalog under NSN 5330-01-377-1604. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17-21003-00

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.