PartsTable / COMPONENT / 17-1773-02
17-1773-02
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.398 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN, material: STEEL COMP 302, overall_height: 0.676 INCHES MINIMUM AND 0.696 INCHES MAXIMUM IN, stock_diameter: 0.038 INCHES NOMINAL IN, style_designator: PIN, surface_treatment: CADMIUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-127-3666, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
17-1773-02
NSN: 5340-00-127-3666 FSC: 5340 CAGE: 77820 — AMPHENOL CORP DIV AMPHENOL AEROSPACE OPERATIONS (USA)
SPECIFICATIONS
width 0.398 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN material STEEL COMP 302 overall_height 0.676 INCHES MINIMUM AND 0.696 INCHES MAXIMUM IN stock_diameter 0.038 INCHES NOMINAL IN style_designator PIN surface_treatment CADMIUM casehardening_indicator NOT CASEHARDENED material_document_and_classification TY 302 ASSN STD SINGLE MATERIAL RESPONSE NSN 5340-00-127-3666
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 17-1773-02
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL DOCUMENT AND CLASSIFICATION: TY 302 ASSN STD SINGLE MATERIAL RESPONSE
• SURFACE TREATMENT: CADMIUM
• WIDTH: 0.398 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN
• CASEHARDENING INDICATOR: NOT CASEHARDENED
• STOCK DIAMETER: 0.038 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL STEEL COMP 302 MATERIAL DOCUMENT AND CLASSIFICATION TY 302 ASSN STD SINGLE MATERIAL RESPONSE SURFACE TREATMENT CADMIUM STYLE DESIGNATOR PIN WIDTH 0.398 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN CASEHARDENING INDICATOR NOT CASEHARDENED OVERALL HEIGHT 0.676 INCHES MINIMUM AND 0.696 INCHES MAXIMUM IN STOCK DIAMETER 0.038 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
69C Upgraded Successor successor cross-reference
successor
11170 Upgraded Successor successor cross-reference
successor
1338236 Upgraded Successor successor cross-reference
successor
6515NCM152067 Upgraded Successor successor cross-reference
successor
11170-1 Interchangeable interchangeable cross-reference
interchangeable
031124G Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 17-1773-02?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17-1773-02?
17-1773-02 is a CLIP,RETAINING.
What parts can replace 17-1773-02?
There are 20 known substitutes for 17-1773-02: 69C, 11170, 1338236 and 17 more. Substitute compatibility should be verified for your specific system.
Is 17-1773-02 still available?
17-1773-02 is currently cancelled.
Request a Quote — 17-1773-02