PartsTable
Technical Data Sheet
Download PDF

17-1031 — SCREW,TAPPING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

17-1031: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, part_name_assigned_by_controlling_agency: TAPPERED NOZZLE, RUBBER, RED. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-619-1990, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17-1031
NSN: 5305-00-619-1990
NIINs: 006191990, 013512682, 016831027
FSC: 5305 — Screws
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
part_name_assigned_by_controlling_agencyTAPPERED NOZZLE, RUBBER, RED
NSN5305-00-619-1990
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 17-1031 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.875 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: DOG TYPE (TYPE B OR C)
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: B TYPE
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD HEIGHT0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH0.875 INCHES NOMINAL IN
NONMACHINE THREAD STYLEDOG TYPE (TYPE B OR C)
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAB TYPE
INTERNAL DRIVE STYLEW/O INTERNAL DRIVE
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
FFS107Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 17-1031?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17-1031?
17-1031 is a SCREW,TAPPING.
What parts can replace 17-1031?
There is 1 known substitute for 17-1031: FFS107. Substitute compatibility should be verified for your specific system.
What is the NSN for 17-1031?
17-1031 is cataloged in the U.S. Government catalog under NSN 5305-00-619-1990. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17-1031

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.