PartsTable
Technical Data Sheet
Download PDF

17-1-B — FOUNTAIN,EYE AND FACE WASH,EMERG

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

17-1-B: FOUNTAIN,EYE AND FACE WASH,EMERG.

FOUNTAIN,EYE AND FACE WASH,EMERG. Key specifications include overall_width: 3.80 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED, overall_height: 4.68 INCHES NOMINAL IN, overall_length: 5.56 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S) SINGLE GROUP, frequency_rating: 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM FIRST COMPONENT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-264-4553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 17-1-B
NSN: 5340-00-264-4553
NIINs: 002644553, 010801886, 011075660, 015442775, 016333259, 016842887
FSC: 5340 — Hardware, Commercial
CAGE: 22377 — RAINIER INDUSTRIES, LTD. MARKHAM DIVISION (USA)
SPECIFICATIONS
overall_width3.80 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_height4.68 INCHES NOMINAL IN
overall_length5.56 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
frequency_rating50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM FIRST COMPONENT
special_features6 INCH CABLE TENSIONER IN
features_providedW/OVERLOAD PROTECTION
mounting_hole_diameter0.250 INCHES NOMINAL SINGLE GROUP IN
end_item_identificationWINCH,CROSS-DECK
winding_operating_current200.0 AMPERES AC NOMINAL SINGLE COMPONENT SINGLE PRIMARY INPUT
winding_operating_voltage115.0 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY INPUT
NSN5340-00-264-4553
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17-1-B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESBRASS; 2.016 IN. MIN PROJECTED DIM.; FOR 1 IN. DIA ROD; PKG 12 PER BX IN
SUBSTITUTES & CROSS-REFERENCES 2
DDD-C-641Reference document
Same NSN cross-reference
Reference document — Secondary reference
DDD-C-641TYDCLAReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 17-1-B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17-1-B?
17-1-B is a FOUNTAIN,EYE AND FACE WASH,EMERG. It is classified as a MRO (MRO_GENERAL).
What parts can replace 17-1-B?
There are 2 known substitutes for 17-1-B: DDD-C-641, DDD-C-641TYDCLA. Substitute compatibility should be verified for your specific system.
What is the NSN for 17-1-B?
17-1-B is cataloged in the U.S. Government catalog under NSN 5340-00-264-4553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17-1-B