PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16X5207
16X5207 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 0.8750 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4850, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16X5207
NSN: 3110-00-156-4850
FSC: 3110
CAGE: 61495 — JAYELL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width0.8750 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
internal_fit-up_contact_angular_directionOUTWARD CONVERGENT
NSN3110-00-156-4850
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 16X5207 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 72.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: GREASE
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER72.00 MILLIMETERS NOMINAL MM
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALGREASE
CONTACT ANGLE25.0 DEGREES MAXIMUM
SURFACE FINISHGROUND
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
132210-000Interchangeable
interchangeable cross-reference
interchangeable
10283Interchangeable
interchangeable cross-reference
interchangeable
AE9295Interchangeable
interchangeable cross-reference
interchangeable
MIL-S-37080Interchangeable
Slippers,convalescent Patients'
interchangeable
5207Interchangeable
IBM 146.8GB 10K 2Gbps FC HS
interchangeable
120394Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16X5207?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16X5207?
16X5207 is a BEARING,BALL,ANNULAR.
What parts can replace 16X5207?
There are 26 known substitutes for 16X5207: 132210-000, 10283, AE9295 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16X5207?
16X5207 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4850. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16X5207

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026