PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16TX134
16TX134 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.641 INCHES NOMINAL IN, outside_diameter: 3.756 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.751 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-5163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16TX134
NSN: 5330-00-599-5163
FSC: 5330
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT A
case_styleSQUARE
seal_width0.641 INCHES NOMINAL IN
outside_diameter3.756 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.751 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-599-5163
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16TX134 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.756 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.751 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: LEATHER SEALING ELEMENT A
•
SEAL WIDTH: 0.641 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.756 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.751 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALLEATHER SEALING ELEMENT A
MATERIALLEATHER SEALING ELEMENT B
SEAL WIDTH0.641 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
35149Interchangeable
interchangeable cross-reference
interchangeable
DX641Interchangeable
interchangeable cross-reference
interchangeable
7A025006Interchangeable
interchangeable cross-reference
interchangeable
10A8779Interchangeable
interchangeable cross-reference
interchangeable
XR5107NInterchangeable
interchangeable cross-reference
interchangeable
XR5107Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16TX134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16TX134?
16TX134 is a SEAL,PLAIN ENCASED.
What parts can replace 16TX134?
There are 17 known substitutes for 16TX134: 35149, DX641, 7A025006 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16TX134?
16TX134 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-5163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16TX134

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026