16S510-11 — WASHER,RECESSED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

16S510-11: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.752 INCHES MINIMUM AND 0.754 INCHES MAXIMUM IN, surface_finish: 32.0 MICROINCHES ALL SURFACES, outside_diameter: 1.800 INCHES NOMINAL IN, style_designator: RECESSED BOTH SIDES, top_recess_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-052-0743, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

16S510-11

NSN: 5310-01-052-0743
FSC: 5310 — Nuts and Washers
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)

SPECIFICATIONS

material	STEEL OVERALL
hole_diameter	0.752 INCHES MINIMUM AND 0.754 INCHES MAXIMUM IN
surface_finish	32.0 MICROINCHES ALL SURFACES
outside_diameter	1.800 INCHES NOMINAL IN
style_designator	RECESSED BOTH SIDES
top_recess_angle	90.0 DEGREES NOMINAL
material_thickness	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
bottom_recess_angle	90.0 DEGREES NOMINAL
top_recess_diameter	0.907 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
bottom_recess_diameter	0.907 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
material_document_and_classification	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-01-052-0743

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES ALL SURFACES

•

TOP RECESS DIAMETER: 0.907 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN

•

BOTTOM RECESS DIAMETER: 0.907 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN

•

TOP RECESS ANGLE: 90.0 DEGREES NOMINAL

•

STYLE DESIGNATOR: RECESSED BOTH SIDES

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

OUTSIDE DIAMETER: 1.800 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES ALL SURFACES
TOP RECESS DIAMETER	0.907 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
BOTTOM RECESS DIAMETER	0.907 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
TOP RECESS ANGLE	90.0 DEGREES NOMINAL
STYLE DESIGNATOR	RECESSED BOTH SIDES
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER	1.800 INCHES NOMINAL IN
MATERIAL THICKNESS	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
BOTTOM RECESS ANGLE	90.0 DEGREES NOMINAL
MATERIAL	STEEL OVERALL

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 1

16D510-11Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 16S510-11?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 16S510-11?

16S510-11 is a WASHER,RECESSED.

What parts can replace 16S510-11?

There is 1 known substitute for 16S510-11: 16D510-11. Substitute compatibility should be verified for your specific system.

What is the NSN for 16S510-11?

16S510-11 is cataloged in the U.S. Government catalog under NSN 5310-01-052-0743. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

16S510-11 — WASHER,RECESSED

Request a Quote — 16S510-11