PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16FM18C7-32
16FM18C7-32 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, special_features: AFBMA STANDARD TOLERANCE FOR BALLS,GRADE 24, style_designator: BALL, rolling_element_diameter: 0.2187 INCHES NOMINAL IN, material_document_and_classification: 66 FED STD ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6150, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16FM18C7-32
NSN: 3110-00-100-6150
FSC: 3110
CAGE: 82796 — COLTEC INDUSTRIES INC. DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
special_featuresAFBMA STANDARD TOLERANCE FOR BALLS,GRADE 24
style_designatorBALL
rolling_element_diameter0.2187 INCHES NOMINAL IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
NSN3110-00-100-6150
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 16FM18C7-32 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.2187 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
ROLLING ELEMENT DIAMETER0.2187 INCHES NOMINAL IN
SPECIAL FEATURESAFBMA STANDARD TOLERANCE FOR BALLS,GRADE 24
STYLE DESIGNATORBALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
2627Interchangeable
interchangeable cross-reference
interchangeable
14371Interchangeable
interchangeable cross-reference
interchangeable
1914534Interchangeable
interchangeable cross-reference
interchangeable
1918806Interchangeable
interchangeable cross-reference
interchangeable
9100297Interchangeable
interchangeable cross-reference
interchangeable
44Z689D2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16FM18C7-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16FM18C7-32?
16FM18C7-32 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 16FM18C7-32?
There are 30 known substitutes for 16FM18C7-32: 2627, 14371, 1914534 and 27 more. Substitute compatibility should be verified for your specific system.
Is 16FM18C7-32 still available?
16FM18C7-32 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16FM18C7-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026