PartsTable
Technical Data Sheet
Download PDF

16B1882-13 — LEAF,BUTT HINGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

16B1882-13: LEAF,BUTT HINGE.

The LEAF,BUTT HINGE is a the manufacturer industrial component. Key specifications include material: STEEL UNS J92200 OVERALL, hinge_pin: NOT INCLUDED, overall_length: 6.270 INCHES MINIMUM AND 6.280 INCHES MAXIMUM IN, special_features: BOTH ENDS FORKED,0.930 IN. EACH SIDE IN, surface_treatment: PAINT OVERALL, reversible_feature: NOT INCLUDED.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-075-3689, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16B1882-13
NSN: 5340-01-075-3689
FSC: 5340 — Hardware, Commercial
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialSTEEL UNS J92200 OVERALL
hinge_pinNOT INCLUDED
overall_length6.270 INCHES MINIMUM AND 6.280 INCHES MAXIMUM IN
special_featuresBOTH ENDS FORKED,0.930 IN. EACH SIDE IN
surface_treatmentPAINT OVERALL
reversible_featureNOT INCLUDED
material_document_and_classificationAMS 5343 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-075-3689
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16B1882-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
REVERSIBLE FEATURE: NOT INCLUDED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5343 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HINGE PIN: NOT INCLUDED
•
SURFACE TREATMENT: PAINT OVERALL
•
MATERIAL: STEEL UNS J92200 OVERALL
TECHNICAL CHARACTERISTICS
REVERSIBLE FEATURENOT INCLUDED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5343 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH6.270 INCHES MINIMUM AND 6.280 INCHES MAXIMUM IN
HINGE PINNOT INCLUDED
SPECIAL FEATURESBOTH ENDS FORKED,0.930 IN. EACH SIDE IN
SURFACE TREATMENTPAINT OVERALL
MATERIALSTEEL UNS J92200 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340PL0575787Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 16B1882-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16B1882-13?
16B1882-13 is a LEAF,BUTT HINGE.
What parts can replace 16B1882-13?
There is 1 known substitute for 16B1882-13: 5340PL0575787. Substitute compatibility should be verified for your specific system.
What is the NSN for 16B1882-13?
16B1882-13 is cataloged in the U.S. Government catalog under NSN 5340-01-075-3689. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16B1882-13