PartsTable
Technical Data Sheet
Download PDF

16AFA18PC8 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

16AFA18PC8: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, diameter: 0.363 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN, material: STEEL COMP W110 OVERALL, head_style: FLAT FILLISTER, undercut_width: 0.062 INCHES NOMINAL IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-470-1935, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16AFA18PC8
NSN: 5315-00-470-1935
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 7PZX0 — FAIRBANKS MORSE, LLC (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
diameter0.363 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
materialSTEEL COMP W110 OVERALL
head_styleFLAT FILLISTER
undercut_width0.062 INCHES NOMINAL IN
first_end_styleCHAMFERED
undercut_radius0.031 INCHES NOMINAL IN
style_designatorGROOVE
pin_head_diameter0.4995 INCHES MINIMUM AND 0.5005 INCHES MAXIMUM IN
under_head_length0.250 INCHES NOMINAL IN
undercut_diameter0.344 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-00-470-1935
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 16AFA18PC8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.062 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.344 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.4995 INCHES MINIMUM AND 0.5005 INCHES MAXIMUM IN
•
DIAMETER: 0.363 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.062 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER0.344 INCHES NOMINAL IN
UNDER HEAD LENGTH0.250 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.4995 INCHES MINIMUM AND 0.5005 INCHES MAXIMUM IN
DIAMETER0.363 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
HEAD STYLEFLAT FILLISTER
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 8
10AF10C18PC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
21SAF10BPC18Reference document
Same NSN cross-reference
Reference document — Secondary reference
22AF10C18PC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
MAFB18PC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
13AF10B18PC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
7AF9B18PC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 16AFA18PC8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16AFA18PC8?
16AFA18PC8 is a PIN,GROOVED,HEADED.
What parts can replace 16AFA18PC8?
There are 8 known substitutes for 16AFA18PC8: 10AF10C18PC8, 21SAF10BPC18, 22AF10C18PC8 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16AFA18PC8?
16AFA18PC8 is cataloged in the U.S. Government catalog under NSN 5315-00-470-1935. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16AFA18PC8