PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1699N2

1699N2 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 45.00 MILLIMETERS NOMINAL MM, overall_width: 19.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-107-7556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1699N2
NSN: 3110-00-107-7556
FSC: 3110
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter45.00 MILLIMETERS NOMINAL MM
overall_width19.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
overall_outside_diameter85.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-107-7556
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1699N2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL MM
•
SEAL QUANTITY: 1
•
MATERIAL: STEEL INNER RING
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS
BORE DIAMETER45.00 MILLIMETERS NOMINAL MM
SEAL QUANTITY1
MATERIALSTEEL INNER RING
MATERIALSTEEL RETAINER
MATERIALSTEEL BALL
MATERIALRUBBER SYNTHETIC SEAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL OUTER RING
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
6209RSInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1-4935InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FFB171InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
35445InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GB335L20InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
H9509InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1699N2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1699N2?
1699N2 is a BEARING,BALL,ANNULAR.
What parts can replace 1699N2?
There are 19 known substitutes for 1699N2: 6209RS, 1-4935, FFB171 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1699N2?
1699N2 is cataloged in the Federal Logistics Information System under NSN 3110-00-107-7556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1699N2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026