PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1699-0
1699-0 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 1.250 INCHES NOMINAL IN, current_rating: 0.200 AMPERES, overall_height: 0.730 INCHES NOMINAL IN, overall_length: 2.650 INCHES NOMINAL IN, shell_material: COPPER ALLOY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0509, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1699-0
NSN: 3110-00-100-0509
FSC: 3110
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width1.250 INCHES NOMINAL IN
current_rating0.200 AMPERES
overall_height0.730 INCHES NOMINAL IN
overall_length2.650 INCHES NOMINAL IN
shell_materialCOPPER ALLOY
insert_materialPLASTIC SINGLE MATING END
pressure_ratingERR-060
outside_diameter1.6875 INCHES NOMINAL IN
special_featuresDISPLAYS THE ACTUAL PERCENT OF R-12,R-134A,R-22,AND AIR IN THE SYSTEM OR TANK;AIR PURGE;VISUAL AND AUDIBLE HYDROCARBON ALARM;ON BOARD PRINTER PORT A
mating_end_quantity1
contact_removabilityNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
NSN3110-00-100-0509
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1699-0 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 1.6875 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0630 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTEEP ANGLE
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL WIDTH0.3750 INCHES NOMINAL IN
OUTSIDE DIAMETER1.6875 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0630 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
374-160-102Interchangeable
interchangeable cross-reference
interchangeable
013-009Interchangeable
interchangeable cross-reference
interchangeable
1699Interchangeable
interchangeable cross-reference
interchangeable
33-5294-1Interchangeable
interchangeable cross-reference
interchangeable
5294-1Interchangeable
interchangeable cross-reference
interchangeable
PC200BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1699-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1699-0?
1699-0 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 1699-0?
There are 24 known substitutes for 1699-0: 374-160-102, 013-009, 1699 and 21 more. Substitute compatibility should be verified for your specific system.
Is 1699-0 still available?
1699-0 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1699-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026