PartsTable
Technical Data Sheet
Download PDF

169507 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

169507: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.143 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6061 BAND, overall_width: 0.240 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, THREADED, nominal_thread_size: 0.138 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-064-8165, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
169507
NSN: 5340-01-064-8165
FSC: 5340 — Hardware, Commercial
CAGE: 09384 — CEC VIBRATION PRODUCTS, LLC DBA CEC VIBRATIONS PRODUCTS (USA)
SPECIFICATIONS
diameter0.143 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6061 BAND
overall_width0.240 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, THREADED
nominal_thread_size0.138 INCHES IN
loop_inside_diameter0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
thread_quantity_per_inch32
distance_from_loop_center_to_tongue_end0.530 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.370 INCHES NOMINAL IN
NSN5340-01-064-8165
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 169507 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.143 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.530 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
THREAD QUANTITY PER INCH: 32
•
TONGUE HOLE TYPE: ROUND, THREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.370 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.143 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
OVERALL WIDTH0.240 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.530 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.138 INCHES IN
THREAD QUANTITY PER INCH32
TONGUE HOLE TYPEROUND, THREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.370 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061 BAND
LOOP INSIDE DIAMETER0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 169507?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 169507?
169507 is a CLAMP,LOOP.
What is the NSN for 169507?
169507 is cataloged in the U.S. Government catalog under NSN 5340-01-064-8165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 169507

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.