PartsTable
Technical Data Sheet
Download PDF

169243 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

169243: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL COMP 4130 OVERALL, cup_width: 0.6250 INCHES NOMINAL IN, cone_width: 0.7710 INCHES NOMINAL IN, corner_shape: SQUARE INSIDE RIGHT CORNER, flange_width: 0.0940 INCHES MINIMUM AND 0.1100 INCHES MAXIMUM IN, bore_diameter: 1.3125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-5998, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 169243
NSN: 3110-00-100-5998
NIINs: 001005998, 005161323, 011214798
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 27996 — HEIL ENVIRONMENTAL INDUSTRIES (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
cup_width0.6250 INCHES NOMINAL IN
cone_width0.7710 INCHES NOMINAL IN
corner_shapeSQUARE INSIDE RIGHT CORNER
flange_width0.0940 INCHES MINIMUM AND 0.1100 INCHES MAXIMUM IN
bore_diameter1.3125 INCHES NOMINAL IN
overall_width0.7813 INCHES NOMINAL IN
overall_length0.2820 INCHES MINIMUM AND 0.2980 INCHES MAXIMUM IN
standout_width0.1563 INCHES NOMINAL IN
surface_finish200.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
style_designatorSOLID, EXTERNAL FLANGE ONE END
surface_treatmentCADMIUM OVERALL
NSN3110-00-100-5998
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 169243 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.6250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 2.7170 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0500 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1563 INCHES NOMINAL IN
•
CONE WIDTH: 0.7710 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CUP WIDTH0.6250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH0.7813 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.7170 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0500 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.1563 INCHES NOMINAL IN
CONE WIDTH0.7710 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.3125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 8
348640Reference document
Same NSN cross-reference
Reference document — Secondary reference
ME84Reference document
Same NSN cross-reference
Reference document — Secondary reference
207J24ITEM2A1Reference document
Same NSN cross-reference
Reference document — Secondary reference
14130-14276Reference document
Same NSN cross-reference
Reference document — Secondary reference
921322Reference document
Same NSN cross-reference
Reference document — Secondary reference
AA59649-117Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 169243?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 169243?
169243 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 169243?
There are 8 known substitutes for 169243: 348640, ME84, 207J24ITEM2A1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 169243?
169243 is cataloged in the U.S. Government catalog under NSN 3110-00-100-5998. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 169243

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.