PartsTable
Technical Data Sheet
Download PDF

169-6985324-7 — RUBBER STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

169-6985324-7: RUBBER STRIP.

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 27.400 INCHES NOMINAL IN, material: RUBBER, surface_condition: SMOOTH BOTH SIDES, cross-sectional_width: 0.250 INCHES NOMINAL IN, cross-sectional_height: 1.000 INCHES NOMINAL IN, end_item_identification: NSSN CLASS SUBMARINE;ENGINE ROOM WATERTIGHT BILGE DOOR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-500-9052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
169-6985324-7
NSN: 5330-01-500-9052
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
length27.400 INCHES NOMINAL IN
materialRUBBER
surface_conditionSMOOTH BOTH SIDES
cross-sectional_width0.250 INCHES NOMINAL IN
cross-sectional_height1.000 INCHES NOMINAL IN
end_item_identificationNSSN CLASS SUBMARINE;ENGINE ROOM WATERTIGHT BILGE DOOR
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyGASKET
NSN5330-01-500-9052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 169-6985324-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 27.400 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 1.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
SURFACE CONDITION: SMOOTH BOTH SIDES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
LENGTH27.400 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT1.000 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
SURFACE CONDITIONSMOOTH BOTH SIDES
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET
END ITEM IDENTIFICATIONNSSN CLASS SUBMARINE;ENGINE ROOM WATERTIGHT BILGE DOOR
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 2
H545-4001-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
160-6985324Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 169-6985324-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 169-6985324-7?
169-6985324-7 is a RUBBER STRIP.
What parts can replace 169-6985324-7?
There are 2 known substitutes for 169-6985324-7: H545-4001-7, 160-6985324. Substitute compatibility should be verified for your specific system.
What is the NSN for 169-6985324-7?
169-6985324-7 is cataloged in the U.S. Government catalog under NSN 5330-01-500-9052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 169-6985324-7