PartsTable
Technical Data Sheet
PartsTable / MRO / 169-1-111
169-1-111 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: ALUMINUM ALLOY OVERALL, barrel_style: STRAIGHT ROUND TYPE, flange_style: FLANGE, barrel_height: 0.700 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, barrel_outside_diameter: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-988-3920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 169-1-111
NSN: 5325-00-988-3920
FSC: 5325
CAGE: 07421 — L3HARRIS INTERSTATE ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
barrel_styleSTRAIGHT ROUND TYPE
flange_styleFLANGE
barrel_height0.700 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
barrel_outside_diameter0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
flange_outside_diameter0.300 INCHES NOMINAL IN
NSN5325-00-988-3920
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 169-1-111 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE OUTSIDE DIAMETER: 0.300 INCHES NOMINAL IN
•
FLANGE STYLE: FLANGE
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
BARREL HEIGHT: 0.700 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
BARREL OUTSIDE DIAMETER: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
BARREL STYLE: STRAIGHT ROUND TYPE
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE OUTSIDE DIAMETER0.300 INCHES NOMINAL IN
FLANGE STYLEFLANGE
MATERIALALUMINUM ALLOY OVERALL
BARREL HEIGHT0.700 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
BARREL OUTSIDE DIAMETER0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
BARREL STYLESTRAIGHT ROUND TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
169111-1Interchangeable
interchangeable cross-reference
interchangeable
PE60FS06Interchangeable
interchangeable cross-reference
interchangeable
PE60Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 169-1-111?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 169-1-111?
169-1-111 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 169-1-111?
There are 3 known substitutes for 169-1-111: 169111-1, PE60FS06, PE60. Substitute compatibility should be verified for your specific system.
What is the NSN for 169-1-111?
169-1-111 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-988-3920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 169-1-111

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026